Showing posts with label firewall. Show all posts
Showing posts with label firewall. Show all posts

Jan 5, 2013

Open a Linux firewall port - IPTables

IPTables is the default firewall in any unix/linux system. If we host a service such as FTP or web server, we need to open some ports in order to use that service from remote hosts. For that we need to edit the configurations in this firewall.

First we can check the status of IPTables by running this command;

service iptables status

By default most systems open the ssh port 22. Now we need to get the running configurations to edit it. To do that;

iptables-save > /tmp/iptables

This command will dump the running iptables configurations in to a file and it will be like this.

# Generated by iptables-save v1.4.7 on ...
:OUTPUT ACCEPT [39:2878]
-A INPUT -p icmp -j ACCEPT 
-A INPUT -i lo -j ACCEPT 
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT 
-A INPUT -j REJECT --reject-with icmp-host-prohibited 
-A FORWARD -j REJECT --reject-with icmp-host-prohibited 
# Completed on ...

Assume that we need to run a web server on this host. Web servers usually runs on port 80. Therefore, we need to allow port 80. To allow that we can add a line similar to the ssh rule.

-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT 
-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT 
-A INPUT -j REJECT --reject-with icmp-host-prohibited 

Then you need to feed this configurations to the iptables. To do that;

iptables-restore < /tmp/iptables

Now if you run the 'service iptables status' command, you can see port 80 is also allowed in it. But if you restart the service (service iptables restart) or reboot the machine, those changes will be not there. That's because it use a default configuration file on the service initialization. This default file is different from system to system. In CentOS systems that file is locates in '/etc/sysconfig/iptables'. After all the things are complete, you can save the running iptables configurations on that file it self.

But it is better if you use an alternative method like 'cron job' to run modify this iptables configurations. To do that you need to add a cron job as root by;

crontab -e

and add;

@reboot /sbin/iptables-restore < /root/myiptables

 The modified iptables rule set must be located on that location.

Note: In few Linux distributions there is a another firewall called 'SELinux'. If you have an issue even after changing those settings in IPTables, it is better to check SELinux settings too.